| Product: | Push-Button Switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. The 8P series is a panel seal pushbutton switch with an O-ring to provide drip-proof and dust proof effect (corresponding to IP67 rating). |
| 2. Since a locking ring cannot be used because the panel seal is required, “D-cutting” is provided to the sleeve to prevent the switch from rotating. | |
| 3. Note that the switch can also be mounted to a 6.5 mm dia.round hole instead of a "D-cut" hole without losing the drip-proof and dust proof effect. | |
| 4. The 8P series is intended for panel seal and is not designed for use in water. | |
| 5. Silver or gold-plated contacts | |
| 6. Epoxy resin case UL94V-0 self-extinguishing epoxy. | |
| 7. Insulation between terminal and ground: 4 mm minimum. | |
| 8. Prevention of flux entry The epoxy resin seal on bottom of the switch helps prevent short-circuiting between poles ensuring high reliability | |
| 9. Insulation barrier: Insulation barrier design between poles helps prevent short-circuiting between poles ensuring high reliability |
Contact
| Specifications | |
| Packaging method: | Tray, Bag |
| Installation type: | Panel, embedding |
| Operating temp: | －30℃～85℃ |
| Ampacity: | 6A /3A /4A |
| Rated voltage: | 125VAC/250VAC/30VDC |
| Size (mm) (L*W*H,Φ): |
8x13x37.1,Φ10 8x13x37.1,Φ12 |
| note | For further information, please contact:+886-3-4266335 |
※The 8P series is intended for panel seal and is not designed for use in water.
Back