| Product: | Toggle switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. Ultra-miniature toggle switch for high density mounting. |
| 2. Washable. | |
| 3. Terminal pin pitch : 2.54 mm. | |
| 4. Independent detent mechanism ensures light operational feel. | |
| 5. Clip contact mechanism for long-term contact reliability. | |
| 6. Gold-plated contacts. |
Contact
| Specifications | |
| Packaging method: | Tray |
| Installation type: | Through hole, right angle, vertical/through hole/through hole vertical |
| Operating temp: | －40℃～85℃ |
| Ampacity: | Max. 0.4VA (DC28V Max.) Min. DC20mV 1μ A |
| Rated voltage: | Max. 0.4VA (DC28V Max.) Min. DC20mV 1μ A |
| Size (mm) (L*W*H): |
4.5X7X5.4 |
| note | For further information, please contact:+886-3-4266335 |
ELECTRICAL CHARACTERISTICS |
|
| Initial contact resistance: | 100mΩ max. (AC200μ V 1.5mA) |
| Dielectric strength: | AC250V 1 minute |
| Insulation resistance: | 500MΩmin. (DC250V) |
| Electrical life: | 10,000 cycles at max. rating 50,000 cycles at min. rating（D,E type） 30,000 cycles at min. rating（F,G type） |
Soldering Specifications |
| (1) Manual Soldering Device：Soldering iron 380℃, Max.; 3 seconds, Max. |
| (2) Auto Soldering Device：Jet wave type or dip type 275℃, Max.; 6 seconds, Max. |
| (3) Pre-heating should be done at temperatures from 80 to 120℃ and within 120 sec. |
| (4) When soldering two or more terminals to a common land, use solder resist to separate them. |
 |
Flux Cleaning |
| (1) Solvent : Fluorine or Alcohol type. |
| (2) Cleaning after soldering should be done after the PC board is exposed to room temperature (30℃ or below) for 1 to 2 hours. |
| (3) Do not use ultrasonic cleaning. |
Part number designation |
||||||
| F | T | ２ | D - | ２ | M | Z |
| Series code | Actuator shape | Number of poles | Switching function | Terminal style | Actuator shape | |
| T:Toggle type |
1:1 pole 2:2 poles |
D:ON-ONE:ON-OFF-ONF:ON-(ON) G:(ON)-OFF-(ON) |
2:PC Straight 5:Right angle 4:Vertical mounting |
M: Standards |
||
Back