| Product: | Toggle Switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. Miniature size (Single-pole: 7.6mm, Doublepole:12.7mm) for high density mounting. |
| 2. Gold-plated contacts. | |
| 3. Short travel distance. | |
| 4. Independent detent mechanism ensures light operational feel. | |
| 5. Reflow soldering available. | |
| 6. Wiping contact mechanism for long-term reliability. |
Contact
| Specifications | |
| Packaging method: | Bag |
| Installation type: | Through hole |
| Operating temp: | －20℃～ 85℃ |
| Ampacity: | Max.: 50mA |
| Rated voltage: | Max.: AC・DC20V |
| Size (mm) (L*W*H): |
5.08x15.8x35 |
| note | For further information, please contact:+886-3-4266335 |
| Additional info | |
| Terminal: | PC pins |
| Circuits: | SPDT/DPDT |
Part Numbering |
||||||
| B | T | 2 | N- | 2 | M | 4 |
| Series code |
Actuator shape |
Number of poles | Switching function | Terminal style | Actuator shape | Bracket style |
| T: Toggle type |
1:1 pole 2:2 poles |
D/N:ON ー ON E:ONーOFF ーON F:ON ー(ON） H:ONーOFFー(ON） |
2:P/C Straight |
M: Standard |
4: With bracket |
|
Soldering Specifications
- Manual Soldering
Device ： Soldering iron
380℃, Max.; 3 seconds, Max. - Auto Soldering
Device ： Jet wave type or dip type
275℃, Max.; 3 seconds, Max. - Pre-heating should be done at temperatures below 100℃ and within 30 sec.
- When soldering two or more terminals to the common land, use the solder resist to solder them independently.
Flux Cleaning
- Solvent : Fluorine or Alcohol type.
- The BT series are not washable. To wash the PC board,clean the soldering surface of PC board with a brush so that the switch is not exposed to the cleaning solution.
- Cleaning after soldering should be done after the terminal temperature falls to 90℃ or below, or after leaving the switch for five minutes or longer at room temperature.
Mounting of Switch
- Use PC boards with hole diameter of 0.8mm.
- Do not bend the terminal pins before mounting the switch on the PC board.
- After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch.
- Do not apply load exceeding 29.4N to the actuator.
Back