| Product: | Detect switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. Low profile design of 2mm |
| 2. Automatic mounting possible | |
| 3. For detection of operation from side direction | |
| 4. High reliability by Gold contact | |
| 5. RoHS compliant |
Contact
| Specifications | |
| Packaging method: | Tape&Reel |
| Installation type: | SMD |
| Operating temp: | －40℃ ~ +85℃ |
| Ampacity: | Switching︰100 mA Minimum︰1 μA |
| Rated voltage: | Switching︰DC12 V Minimum︰DC20 mV |
| Size (mm) (L*W*H): |
5.7X4X2 |
| note | For further information, please contact:+886-3-4266335 |
Electrical characteristics
| Contact rating: | Switching DC12 V, 100 mA Minimum DC20 mV, 1 μA |
|---|---|
| Contact resistance: | 100 mΩ maximum |
| Insulation resistance: | 100 MΩ (DC100 V) minimum |
| Dielectric strength: | AC250 V, 60s |
Mechanical characteristics
| Switching function: | OFF － (ON) / ON － (OFF) |
|---|---|
| Stroke: | Pre-travel: 0.35mm Over-travel: 2.0mm Total: 2.35mm |
| Operating force: | 0.75N {0.075 kgf} |
| Stop strength: | 5N {0.51 kgf}, 60s |
| Solderability: | 245 ± 3 °C, 2~3s |
| Soldering heat: | Reflow：260 °C (Peak temperature) （Please refer to the profile below） |
| Shear (Adhesion): | 5N {0.51 kgf} 10s |
| Substrate bending: | Width 90 mm, bend 3mm, 5s, 1 time |
| Pull-off strength: | 5N {0.51 kgf} 10s |
{ } : Reference only
Environmental characteristics
| Vibration: | Amplitude 1.5 mm（Total amplitude）or Acceleration 98 m/s2, 10-500 Hz, 3 directions for 10 cycles each |
|---|---|
| Shock: | 490 m/s2, 11 ms 6 directions for 3 times each |
| Load life: | Continuous load 50,000cycles DC12 V, 100 mA |
| Humidity: | −10 ~ 65 °C, Relative humidity 0 ~ 96 %, 24 h for 10 cycles |
| High temp. exposure: | 85 °C, 96 h No load |
| Low temp. exposure: | −40 °C, 96 h No load |
| Thermal shock: | −40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Back