| Product: | DIP Switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. Protection against dust and whole cleaning after soldering is possible |
| 2. Translucent knob with flange type (S-1200A/2200A series), pin compatible with conventional DIP switches | |
| 3. RoHS compliant |
Contact
| Specifications | |
| Packaging method: | Tray, Pack |
| Installation type: | Through hole/right angle |
| Operating temp: | -40℃ ~ 85℃ |
| Ampacity: | Non-switching: 100 mA Switching: 100 mA Minimum: 1 μA |
| Rated voltage: | Non-switching: DC50 V Switching: DC5 V Minimum: DC20 mV |
| Size (mm) (L*W*H): |
10X10X7 |
| note | For further information, please contact:+886-3-4266335 |
Electrical Characteristics
| Contact resistance: | 100 mΩ maximum |
|---|---|
| Insulation resistance: | 1000 MΩ (DC100 V) minimum |
| Dielectric strength: | AC300 V, 60 s |
Mechanical Characteristics
| No. of positions: | 16 (S-1000A), 10 (S-2000A) |
|---|---|
| Adjustment torque: | 13 mN·m {133 gf·cm} min. |
| Stepping angle: | 22.5° (S-1000A), 36° (S-2000A) |
| Terminal strength: | 15 N {1.53 kgf} min. |
| Solderability: | 245 ± 3 °C, 2 ~ 3 s |
| Soldering heat: | Flow : 260 ± 3 °C as the temperature in a pot of molten solder, immer sion from head of terminal to backside of board, 5 ~ 6 s, two times maximum Manual soldering： 380 ± 10 °C, 3 ~ 4 s |
Environmental Characteristics
| Vibration: | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each |
|---|---|
| Shock: | 490 m/s2, 11 ms 6 directions for 3 times each |
| Load life: | 10000 steps DC5 V, 100 mA |
| Humidity (Steady state): | Resistance load DC50V 100mA 60 °C, Relative humidity 90 ~ 95 %, 1000 h |
| High temperature exposure: | 85 °C, 1000 h |
| Low temperature exposure: | −40 °C, 96 h |
| Thermal shock: | −40(0.5 h) ~ 85 °C(0.5 h), 5 cycles |
Back