Product: | Keylock switch |
Manufacturer: | Nidec Copal |
Features: | 1. Direct mounting to PC board. The terminal pin layout is in inch pitch. |
2. Gold-plated contact with self-cleaning, twin contact mechanism provides high contact reliability. | |
3. Steel ball adopted to click mechanism for smooth operation. | |
4. The resistance to soldering heat of contacts is improved by blocking heat from terminals by using the printed circuit board. | |
5. MRKC: Cylinder lock mechanism is adopted, enabling choice of various types of key |
Contact
Specifications | |
Packaging method: | Bag |
Installation type: | Through hole |
Terminal type: | PC pins, Right Angle |
Angle of Throw: | 45º, 90º |
Precautions: | Not washable |
Operating temp: | -20℃~70℃ |
Ampacity: | 0.4VA max(DC20V max) |
Rated voltage: | 0.4VA max(DC20V max) |
Size (mm) (L*W*H): |
14.5X15.8X10.5 15.5X15.5X25.5 |
note | For further information, please contact:+886-3-4266335 |
ELECTRICAL CHARACTERISTICS
Rating: | 0.4VA max. (20VDC max.) |
---|---|
Initial contact resistance: | 200mΩ max. (0.5mA 200μVAC) |
Dielectric strength: | 250VAC 1 minute |
Insulation resistance: | 100MΩ min. (100VDC) |
Electrical life: | 10,000 cycles |
Operating force: | 2.94±0.98N・cm |
Operating temperature range: | -20℃~+70℃ |
Storage temperature range: | -40℃~+80℃ |
Key Removable Position |
||||
Code | Key position | |||
Ⅰ | Ⅱ | Ⅲ | Ⅳ | |
A | 〇 | 〇 | ー | ー |
B | 〇 | × | ー | ー |
D | 〇 | 〇 | 〇 | 〇 |
G | 〇 | 〇 | × | ー |
L | × | 〇 | × | ー |
LIST OF PART NUMBERS
Part Number | Circuit | Number of poles | Terminals | Circuit Function |
---|---|---|---|---|
★MRK1031D-Z | 45°step 3-position | Single Pole | PC Straight | ON ーONーON |
★MRK2031D-Z | 45°step 3-position | Double Pole | PC Straight | ON ーONーON |
★MRK1031D-R-Z | 45°step 3-position | Single Pole | Right Angle | ON ーONーON |
★MRK1031G-Z | 45°step 3-position | Single Pole | Right Angle | ON ーONーON |
★MRK1031L-Z | 45°step 3-position | Single Pole | Right Angle | ON ーONーON |
☆MRK1012A-Z | 90°step 2-position | Single Pole | PC Straight | ON ーON |
☆MRK1012B-Z | 90°step 2-position | Single Pole | PC Straight | ON ーON |
★MRK1012A-R-Z | 90°step 2-position | Single Pole | Right Angle | ON ーON |
☆MRK1012B-R-Z | 90°step 2-position | Single Pole | Right Angle | ON ーON |
- Soldering
⑴Manual Soldering
Device : Solder iron.
360℃ Max. 3 sec. Max.
⑵Auto Soldering
Method:Jet wave or dip type
275℃ Max. 6 sec. Max
●Preheat should be within 80-120℃, 130sec. - Flux Cleaning
①Solvent : Alcohol type.
②MRK series are not washable. To wash the PC board, clean the soldering surface of the PC board with a brush so that the switch is not exposed to the cleaning solution.
Back