Product: Rotary switch
Manufacturer:  Nidec Copal
Features: 1. P.C.B. mounted, compact size and DIP compatible
  2. Protection by “O” ring (contact block) against dust and for cleaning after soldering
  3. Precious metal alloy wiping type contacts provide a long life (50000 revolutions at no load) and high reliability. (In house comparison)
  4. Both shorting and non-shorting types are available
Contact
Specifications
Packaging method: Bag
Installation type: PC pins
Operating temp: -40℃ ~ 85 °C 
Ampacity: Maximum current 1 A
Minimum current 1 μA
Rated voltage: Maximum voltage 30 V
Minimum voltage 20 mV
Size (mm)
(L*W*H):
17.8X12X17.8
17.8X12X35.6
17.8X12X53.4
note For further information, please contact:+886-3-4266335


ELECTRICAL CHARACTERISTICS

Contact rating 1 VA 
Maximum current: 1 A
Minimum current: 1 μ A
Maximum voltage: 30 V
Minimum voltage: 20 mV
Contact timing: Shorting, Non-shorting
Contact resistance: 100 mΩ maximum
Insulation resistance: 1000 MΩ (DC500 V) minimum
Dielectric strength: AC500 V, 60 s
Electrostatic capacity: 4 pF maximum, 10 kHz

MECHANICAL CHARACTERISTICS

Adjustment torque: 60 ± 30 mN·m {612 ± 306 gf·cm}
Stopper strength: 500 mN·m {5.1 kgf·cm} minimum
Stepping angle: 30°
Terminal strength: 10 N {1.02 kgf} minimum
Solderability: 245 ± 3 °C, 2 ~ 3 s
Soldering heat: Flow : 260 ± 3 °C as the temperature in a pot of molten solder,
immer sion from head of terminal to backside of board,
5 ~ 6 s, two times maximum
Manual soldering: 380 ± 10 °C, 3 ~ 4 s

ENVIRONMENTAL CHARACTERISTICS

Load life: 500,000 steps or 50,000 cycles at 6 contacts with no load
200,000 steps or 20,000 cycles at 6 contacts with rated load
Vibration: Amplitude 1.5 mm or Acceleration 196 m/s2,10-2000-10 Hz,
3 directions for 4 h each
Shock: 980 m/s2, 6 ms 6 directions for 3 times each
Humidity (Steady state): 40 °C, Relative humidity 90 ~ 95 %, 240 h
High temperature exposure: 85 °C, 16 h
Low temperature exposure: −40 °C, 16 h

Back