Product: Rocker switch
Manufacturer:  Nidec Copal
Features: 1. Multifunction and utility switch
  2. The actuator that the operability is sought for from the ergonomics
  3. Illuminated type also lineup
  4. Function operation switches for construction machinery and automobile use


               
Contact
Specifications
Packaging method: Bag
Installation type: Panel, embedding
Operating temp: -40~85 ℃
Ampacity: 15A      (Resistive load)
20A      (Resistive load)
100mA    (Min.)
Rated voltage: 24VDC  (Resistive load)
12VDC  (Resistive load)
5VDC  (Min.)
Size (mm)
(L*W*H):
Please refer to the table below
note For further information, please contact:+886-3-4266335

  


Standard specifications

Operating temp. range: -40-+85 ℃
Storage temp. range: -40-+85 ℃
Protection grade: Panel seal(Equivalent to IP68)
No.of poles: 1pole
2poles
Switching function: ON - OFF     Standard type
(ON) ‒ OFF  Standard type
ON ‒ ON      Standard type 
ON - OFF ‒ ON        Standard type
ON - OFF - (ON)     Standard type
(ON) - OFF - (ON)   Standard type
ON ‒ OFF     Lock type
ON ‒ ON      Lock type
 

Electrical characteristics

Contact rating: 15A, 24VDC (Resistive road)
20A, 12VDC (Resistive road)
100mA, 5VDC (Minimum rating)
Contact resistance: (2〜4VDC, 1A) 10mΩ Maximum (initial)
Insulation resistance: 50MΩ Minimum (500VDC)
Dielection strength: 1,500VAC 1minute


LIFE

Electrical life: 50,000 cycles (Rated load) Switching frequency 7.5 cycles/minute
Mechanical life: 150,000 cycles Switching frequency 30 cycles/minute


Environmental characteristics

Vibration: 10-500 Hz, 10-500-10 Hz, 15 minutes 3 directions for 12 times each
Shock: 294 m/s2, 11 ms 6 directions for 3 times each
Humidity: 10 ~ 65 ℃ , Relative 0 ~ 96 %, 24 h for 10 cycles
High temperature exposure: 85 ℃, 16 h
Low temperature exposure: −40 ℃, 16 h
Thermal shock: −55 ℃ (0.5 h) ~ 85 ℃ (0.5 h), 5 cycles
Corrosion resistance(salt spray test): 35℃±2℃ , alt spray of concentration of 5±1% (mass ratio),Spray pressure,68.6~176kPa, Spray 48h


Mechanical characteristics

Switching angle:

2 Positions: 18 °

3 Positions : 9 °

Operating force:

0.3 ~10 N

Stop strength:

(Static load Applied time) : 60 s
X : 49 N
Y : 49 N
Z : 24.5 N

Lock strength(Lock type): Static load): 98 N
Applied time:60S
Apply load to the top in lock state

Illuminated characteristics

LED max rating

Item 

Symbol   LED      Unit 
 Red  Amber  Green  White  Red
(high brightness)
 Forward Curen  IF  30  30  30  20  30  mA
 Reverse Voltage  VR  5  5  5  5  5  V

LED electrical characteristics

Item 

Symbol 

 LED      

Unit

 
 Red  Amber  Green  White  Red
(high brightness)
 Forward Curent (IF = 20 mA)
 
IF  TYP. 1.9  1.9  1.9  2.9 1.9  mA
 MAX. 2.4 2.4  2.6  3.4  2.4  V

Resistance
  • Connected in series with the LED inside the product.

Item 

 LED      

Unit

 
 Red  Amber  Green  White  Red(high brightness)
 Resistance(24VDC) 10 10  2.4  10  2.4
 Resistance(12VDC)  4.7 4.7  1.1  4.7 1.1

Outline dimensions

Standard type 
  • The presence or absence of the terminal depends on the number of poles, Switching function, and illumination circuit.
Lock type

Panel cut out dimensions

Circuit characteristics

Illumination position, internal connection

Accessories

Marking symbol




Back