Product: | Detect switch |
Manufacturer: | Nidec Copal |
Features: | 1. Low profile design of 3.35mm |
2. Ultra-compact | |
3. Automatic mounting possible | |
4. Available to detect from Top or side direction | |
5. High reliability by Gold contact |
Contact
Specifications | |
Packaging method: | Tape&Reel |
Installation type: | SMD |
Operating temp: | -40℃ ~ +85℃ |
Ampacity: | Switching︰1 mA Min.︰1 µA |
Rated voltage: | Switching︰DC5 V Min.︰DC20 mV |
Size (mm) (L*W*H): |
3.5X2.8X2.3 |
note | For further information, please contact:+886-3-4266335 |
Electrical characteristics
Contact rating: | Switching DC5 V, 1 mA Minimum DC20 mV, 1 μA |
---|---|
Contact resistance: | 300 mΩ maximum |
Insulation resistance: | 100 MΩ (DC100 V) minimum |
Dielectric strength: | AC 250 V, 60s |
Mechanical characteristics
Switching function: | OFF - (ON) |
---|---|
Stroke: | Pre-travel: 0.30mm Over-travel: 0.75mm total: 1.05mm |
Operating force: | 0.34 N {0.035 kgf} |
Stop strength: | 2 N {0.2 kgf}, 60 s |
Solderability: | 245 ± 3 °C, 2 ~ 3 s |
Soldering heat: | Reflow:260 °C (Peak temperature) |
Shear (Adhesion): | 5 N {0.51 kgf} 10 s |
Substrate bending: | Width 90 mm, bend 3 mm, 5 s, 1 time |
Pull-off strength: | 5 N {0.51 kgf} 10 s |
{ } : Reference only
Environmental characteristics
Vibration: | Amplitude 1.5 mm(Total amplitude)or Acceleration 98 m/s2, 10-500 Hz, 3 directions for 10 cycles each |
---|---|
Shock: | 490 m/s2, 11 ms 6 directions for 3 times each |
Load life: | Continuous load 100,000 cycles DC 5V, 1mA |
Humidity: | −10 ~ 65 °C, Relative humidity 0 ~ 96 %, 24 h for 10 cycles |
High temp. exposure: | 85 °C, 96 h No load |
Low temp. exposure: | −40 °C, 96 h No load |
Thermal shock: | −40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Back