Product: | DIP Switch |
Manufacturer: | Nidec Copal |
Features: | 1. Low profile of 3.0 mm |
2. Low-profile side setting type with support terminals is available | |
3. Wide variety (top or side setting, 10 or 16 positions, J-hook, gull wing or through hole pins) to choose from | |
4. RoHS compliant |
Contact
Specifications | |
Packaging method: | Tape&Reel |
Installation type: | Surface mount type, through hole |
Operating temp: | -40℃ ~ 85℃ |
Ampacity: |
Non-switching: 100 mA |
Rated voltage: | Non-switching: DC50 V Switching: DC5 V Minimum: DC20 mV |
Size (mm) (L*W*H): |
7.2X7.2X3 |
note | For further information, please contact:+886-3-4266335 |
Electrical Characteristics
Contact resistance: | 100 mΩ max. |
---|---|
Insulation resistance: | 100 MΩ (DC100 V) min. |
Dielectric strength: | AC250 V, 60 s |
Mechanical Characteristics
No. of positions: | 10, 16 |
---|---|
Adjustment torque: | 20 mN·m {204 gf·cm} max. |
Stepping angle: | 36° (10 positions) 22.5° (16 positions) |
Solderability: | 245 ± 3 °C, 2 ~ 3 s |
Soldering heat: |
Reflow:255 °C (Peak temperature) |
Shear (adhesion): | 5 N {0.51 kgf} 10 s |
Substrate bending: | Width 90 mm, bend 3 mm, 5 s, 1 time |
Pull-off strength: | 5 N {0.51 kgf} 10s |
Stop strength (With knob only): | 5 N {0.51 kgf} 10s |
Environmental Characteristics
Vibration: | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each |
---|---|
Shock: | 490 m/s2, 11 ms 6 directions for 3 times each |
Load life: | 10000 steps minimum, DC5 V, 100 mA |
Humidity (Steady state): | 40 °C, Relative humidity 90 ~ 95 %, 240 h |
High temperature exposure: | 85 °C, 96 h |
Low temperature exposure: | -40 °C, 96 h |
Thermal shock: | -40(0.5 h)~85 °C(0.5 h), 5 cycles |
Back