| Product: | DIP Slide Switch |
| Manufacturer: | Nidec Copal |
| Features: | 1. Low profile design of 5 mm |
| 2. Excellent contact stability by twin gold-plated contact | |
| 3. Washable type available by seal tape | |
| 4. Fine click action | |
| 5. RoHS compliant |
Contact
| Specifications | |
| Packaging method: | Tape&Reel |
| Installation type: | Surface mount type, through hole |
| Operating temp: | -40℃ ~ 85℃ |
| Ampacity: | Non-switching: 100 mA Switching: 25 mA Minimum: 1 μA |
| Rated voltage: | Non-switching: DC 50V/ DC 6V Switching: DC24 V Minimum: DC20 mV |
| Size (mm) (L*W*H): |
21.72X6X5 |
| note | For further information, please contact:+886-3-4266335 |
Mechanical Characteristics
| Operation force: | 0.3 ~ 5 N {0.03 ~ 0.51 kgf} maximum |
|---|---|
| Stop strength: | 8 N {0.82 kgf} 60 s |
| Solderability: | 245 ± 3 °C, 2 ~ 3 s |
| Soldering heat: | Reflow：255 °C (Peak temperature) Flow：260 ± 3 °C, 5 ~ 6 s, two times maximum （Please refer to the profile） Manual soldering：350 ± 10 °C, 3 ~ 4 s |
| Shear (Adhesion): | 5 N {0.51 kgf} 10 s |
| Substrate bending: | Width 90 mm, bend 3 mm, 5 s, 1 time |
| Pull-off strength: | 5 N {0.51 kgf} 10 s |
Environmental Characteristics
| Vibration: | (Amplitude) 1.5 mm or (Acceleration) 98 m/s2 , 10-500 Hz, 3 directions for 10 cycles each |
|---|---|
| Shock: | 490 m/s , 11 ms, 6 directions for 3 times each |
| Load life: | Continuous load 500 cycles, DC6 ± 0.5 V, 100 ± 10 mA |
| Humidity: | −10 ~ 65 °C, Relative humidity 0 ~ 96 %,24 h for 10 cycles |
| High temp. exposure: | 85 °C, 96 h |
| Low temp. exposure: | − 40 °C, 96 h |
| Thermal shock: | − 40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
Back